PRODUCTS
SET-GM disc harrows
General information
Technical parameters
General information
Special equipments of traditional tillage are mounted and half-mounted SET-GM disc harrows. They are ideal, and also essential for stubble, for works after harvest, for turning the straw into the soil, but also for weeding uncultivated areas and for smoothing unlevel surfaces. These machines chop and turn the straw intensively and consistently. Due to their big working speed they are able to work large areas.
We produce the disc harrows in working widths of 2,3 and 3 meters in mounted design. Disc harrows in working widths of 4; 4,5; 5 and 6 meters are made in half-mounted design.
Előnyök:
- Maintenance-free bearings
- Individually sprung discs – they follow unevenness of the soil
- Rubber spring elements – protection against stones
- Sealing cylinder for consistent depth keeping, for clod-beetle effect, and for compression
Technical parameters
Technical parameters | SET-GM-23É | SET-GM-30É |
Width: | 2460 mm | 3210 mm |
Working width: | 2300 mm | 3000 mm |
Length: | 2440 mm | 2440 mm |
Height: | 1300 mm | 1300 mm |
Working depth: | 50-200 mm | 50-200 mm |
Power needed in HP | 90 LE | 100-130 LE |
Power needed in Kw: | 67 kW | 74-96 kW |
Max working speed: | 8-10 km/h | 8-10 km/h |
Disc diameter/thickness: | 560/6 mm | 560/6 mm |
Diameter of roller: | 600 mm | 600 mm |
Area performance: | 1,8-2,3 ha/h | 2,4-3 ha/h |
Weight: | 1300 kg | 1694 kg |
Technical parameters | SET-GM-40É | SET-GM-45É |
Width: | 3100 mm | 3100 mm |
Working width: | 4000 mm | 4500 mm |
Length: | 5730 mm | 5730 mm |
Height: | 2610 mm | 2860 mm |
Working depth: | 50-200 mm | 50-200 mm |
Size of rear (tranport) wheel: | 19.0/45 – R17 | 19.0/45 – R17 |
Power needed in HP | 140-160 LE | 160-190 LE |
Power needed in Kw: | 103-118 kW | 118-141 kW |
Max working speed: | 8-10 km/h | 8-10 km/h |
Disc diameter/thickness: | 560/6 mm | 560/6 mm |
Diameter of roller: | 600 mm | 600 mm |
Area performance: | 3-4 ha/h | 3,5-4,5 ha/h |
Pressure of hydraulic system: | min. 120 bar | min. 120 bar |
Weight: | 4200 kg | 4400 kg |
Technical parameters | SET-GM-50É | SET-GM-60É |
Width: | 3100 mm | 3100 mm |
Working width: | 5000 mm | 6000 mm |
Length: | 5730 mm | 5730 mm |
Height: | 3110 mm | 3610 mm |
Working depth: | 50-200 mm | 50-200 mm |
Size of rear (tranport) wheel: | 19.0/45 – R17 | 19.0/45 – R17 |
Power needed in HP | 180-220 LE | 220-260 LE |
Power needed in Kw: | 133-163 kW | 163-192 kW |
Max working speed: | 8-10 km/h | 8-10 km/h |
Disc diameter/thickness: | 560/6 mm | 560/6 mm |
Diameter of roller: | 600 mm | 600 mm |
Area performance: | 4-5 ha/h | 4,5-5,5 ha/h |
Pressure of hydraulic system: | min. 120 bar | min. 120 bar |
Weight: | 4700 kg | 5200 kg |